S-50-24 50W 24V Output Single Output Switching Power Supply
• AC input range selectable by switch
• Protections: Short circuit/ Overload
• Cooling by free air convection
• 100% full load burn-in test
• Low cost, hogh reliability
• 1 year warranty
online service
|
Model Specification |
S-50-5 | S-50-12 | S-50-15 | S-50-24 |
| DC output voltage | 5V | 12V | 15V | 24V |
| Output voltage error (Note2) | ±2% | ±1% | ±1% | ±1% |
| Rated output current | 10A | 4.2A | 3.4A | 2.1A |
| Output current rage | 0-10A | 0-4.2A | 0-3.4A | 0-2.1A |
| Wave and noise(Note3) | 75mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
| Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 50W | 50.4W | 50.4W | 50.4W |
| Efficiency | 71% | 78% | 78% | 82% |
| Adjustable range for DC voltage | ±10,-5% | ±10% | ±10% | ±10% |
| AC input voltage range | 85∼132VAC/170∼264VACselected by switch | |||
| Input current | 1.3A/115V 0.65A/230V | |||
| AC impulse current | Cold-start current 18A/115V 36A/230V | |||
| Leakage current | <0.5mA/240VAC | |||
| Overload protection | 105%∼150%TypeTOLDBACK Reset: auto recovery | |||
| Over-voltage protection | ||||
| High-temperature protection | ||||
| Temperature coefficient | ±0.03%(0∼50) | |||
| Setup rise hold up time | 200ms,100ms,30ms | |||
| Vibration | 10∼500Hz,2G 10min./1cycle,Period for 60min,Each axes | |||
| Withstand voltage | Input and output interval1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC | |||
| Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms | |||
| Working temperature and humidity | -10∼+60,20%∼90%RH | |||
| Store temperature and humidity | -20∼+85,10%∼95RH | |||
| Overall dimension | 159*97*38mm | |||
| Weight | 0.5Kgs | |||
| Safety standards | Meet UL1012 | |||
| EMC standards | ||||
|
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2311must be knocked down. |
||||
Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.
SE-600-5 5V 100A 500w High Switch Power Supply
* AC input active surge current limiting
* AC input range selected by switch
* Protections:Short circuit / Overload / Over voltage / Over temperature
* Forced air cooling by built-in DC fan
* High power density 4.9w/inch3
* Built-in remote sense function
* UL approved
* Low cost
* 2 years warranty
Model:SE-600-5
Brand:YUMO
MOQ:1
Dr-240-24 DIN Rail Series 240W 24V Output Switching Power Supply
1.Power tools series:Electric saw,Drilling machine,Ginder,Sand blast Machine,Puching Machine,Weeding Machine,Air Compressor etc.
2.Office series:Computer,Printer,LCD Monitor,Scanning Machine etc.
3.Household Appliance series:Dust Collector,Fan Lamp or LED,Sewing Machine etc.
4.Kitchen Appliance series:Microwave Oven,Fridge,Freezr,Coffemarker etc.
5.Industrial Equipment series:Shipping,Vehicle,Metalhalide lamp,Solor system,Wind power generation etc.
6.Electric filed series:TV,VCRS,Radio ect.
S-200-24 200W 24V Single Output Switching Power Supply
• AC input range selectable by switch
• Protections: Short circuit/ Overload
• Cooling by free air convection
• 100% full load burn-in test
• Low cost, hogh reliability
• 1 year warranty